DOI:

10.37988/1811-153X_2021_1_124

Main stages of development of materials production technology for removable prosthesis bases

Downloads

Authors

  • Yu.A. Minyaylo 1, 2, head of the Prosthodontics division; assistant at the Prosthetic dentistry Department
    ORCID: 0000-0002-5129-1886
  • A.A. Kopytov 2, PhD in Medical Sciences, PhD in Social Sciences, full professor of the General dentistry Department
    ORCID: 0000-0002-1808-6506
  • S.N. Pozdnyakov 3, head of the Research and development Department
    ORCID: 0000-0002-2578-007X
  • 1 Regional State Dental Clinic no. 1, 308000, Belgorod, Russia
  • 2 Belgorod State University, 308015, Belgorod, Russia
  • 3 “VladMiVa” LLC, 308023, Belgorod, Russia

Abstract

Objectives — Identify the most significant stages and technologies for the production of materials used to make the bases of removable prostheses.
Methods.
Evaluation of PubMed database articles. The search was carried out using the “methyl methacrylate” and “materials for the bases of removable prostheses” terms.
Results.
By the basis of the prosthesis is meant a material in contact with the prosthetic bed, the functions of which are to maintain the stability of the prosthesis and the strong retention of artificial teeth.
Conclusions.
A wide range of scientific approaches to optimization and the use of materials for the manufacture of removable prostheses have been identified.

Key words:

basis, removable prosthesis, methylmethacrylate, ethylmethacrylate

For Citation

[1]
Minyaylo Yu.A., Kopytov A.A., Pozdnyakov S.N. Main stages of development of materials production technology for removable prosthesis bases. Clinical Dentistry (Russia).  2021; 1 (97): 124—130. DOI: 10.37988/1811-153X_2021_1_124

References

  1. D‘Avila O.P., Wendland E., Hilgert J.B., Padilha D.M.P., Hugo F.N. Association between Root Caries and Depressive Symptoms among Elders in Carlos Barbosa, RS, Brazil. — Braz Dent J. — 2017; 28 (2): 234—40. PMID: 28492755
  2. Tandon R., Gupta S., Agarwal S.K. Denture base materials: from past to future. — Indian Journal of Dental Sciences. — 2010; 2: 33—9.
  3. Drage L.A., Rogers S.R 3rd. Burning mouth syndrome. — Dermatol Clin. — 2003; 21 (1): 135—45. PMID: 12622276
  4. Gad M., ArRejaie A.S., Abdel-Halim M.S., Rahoma A. The Reinforcement Effect of Nano-Zirconia on the Transverse Strength of Repaired Acrylic Denture Base. — Int J Dent. — 2016; 2016: 7094056. PMID: 27366150
  5. Pozdnyakov S.N., Tsimbalistov A.V., Chuev V.V., Chuev V.P., Minyailo Y.A., Oganesyan A.A. Comparative analysis of acrylic base resins. — The Dental Institute. — 2016; 4 (73): 98—9 (In Russ.).
  6. Johnson W.W. History of orthopedic dentistry. — J Prosthet Dent. — 1959; 9: 841—6.
  7. Murray M.D., Darvell B.W. The evolution of the complete denture base. Theories of complete denture retention—a review. Part 1. — Aust Dent J. — 1993; 38 (3): 216—9. PMID: 8373295
  8. Khindria S.K., Mittal S., Sukhija U. Evolution of denture base materials. — Journal of Indian Prosthodontic Society. — 2009; 9: 64—9. https://www.j-ips.org
  9. Lang B.R. The use of gold in construction of mandibular denture bases. — J Prosthet Dent. — 1974; 32 (4): 398—404. PMID: 4607270
  10. Kumar G.V., Nigam A., Naeem A., Gaur A., Pandey K.K., Deora A. Reinforcing Heat-cured Poly-methyl-methacrylate Resins using Fibers of Glass, Polyaramid, and Nylon: An in vitro Study. — J Contemp Dent Pract. — 2016; 17 (11): 948—52. PMID: 27965507
  11. Ring M.E. Dentistry: An illustrated history. — St.Louis: Mosby, 1985. — Pp. 183—7.
  12. Rueggeberg F.A. From vulcanite to vinyl, a history of resins in restorative dentistry. — J Prosthet Dent. — 2002; 87 (4): 364—79. PMID: 12011846
  13. Halperin A.R. The cast aluminum denture base. Part I: Rationale. — J Prosthet Dent. — 1980; 43 (6): 605—10. PMID: 6989976
  14. Lundquist D.O. An aluminium alloy as a denture-base material. — J Prosthet Dent. — 1963; 13: 102—10. DOI: 10.1016/0022—3913(63)90202—6
  15. Shaghaleh H., Xu X., Wang S. Current progress in production of biopolymeric materials based on cellulose, cellulose nanofibers, and cellulose derivatives. — RSC Advances. — 2018; 2: 825—42. DOI: 10.1039/C7RA11157F
  16. Totu E.E., Nechifor A.C., Nechifor G., Aboul-Enein H.Y., Cristache C.M. Poly(methyl methacrylate) with TiO2 nanoparticles inclusion for stereolitographic complete denture manufacturing — the fututre in dental care for elderly edentulous patients? — J Dent. — 2017; 59: 68—77. PMID: 28223199
  17. Phillips R.W. Skinner‘s science of dental materials. — Philadelphia: Saunders, 2005. — Pp. 162—169.
  18. Winkler S., Wood R., Facchiano A.M., Boberick K.G., Patel A.R. Prosthodontic self-treatment with acrylic resin super glue: a case report. — J Oral Implantol. — 2006; 32 (3): 132—6. PMID: 16836177
  19. Mikai M., Koike M., Fujii H. Quantitative analysis of allergenic ingredients in eluate extracted from used denture base resin. — J Oral Rehabil. — 2006; 33 (3): 216—20. PMID: 16512888
  20. Peyton F.A. History of resins in dentistry. — Dent Clin North Am. — 1975; 19 (2): 211—22. PMID: 1090459
  21. Lowe L.G. Flexible denture flanges for patients exhibiting undercut tuberosities and reduced width of the buccal vestibule: a clinical report. — J Prosthet Dent. — 2004; 92 (2): 128—31. PMID: 15295320
  22. Chandra J., Patel J.D., Li J., Zhou G., Mukherjee P.K., McCormick T.S., Anderson J.M., Ghannoum M.A. Modification of surface properties of biomaterials influences the ability of Candida albicans to form biofilms. — Appl Environ Microbiol. — 2005; 71 (12): 8795—801. PMID: 16332875
  23. Jagger D.C., Al-Akhazam L., Harrison A., Rees J.S. The effectiveness of seven denture cleansers on tea stain removal from PMMA acrylic resin. — Int J Prosthodont. — 2002; 15 (6): 549—52. PMID: 12475160
  24. Chau V.B., Saunders T.R., Pimsler M., Elfring D.R. In-depth disinfection of acrylic resins. — J Prosthet Dent. — 1995; 74 (3): 309—13. PMID: 7473287
  25. da Silva F.C., Kimpara E.T., Mancini M.N.G., Balducci I., Jorge A.O.C., Koga-Ito C.Y. Effectiveness of six different disinfectants on removing five microbial species and effects on the topographic characteristics of acrylic resin. — J Prosthodont. — 2008; 17 (8): 627—33. PMID: 18761581
  26. Akin M., Aksakalli S., Basciftci F.A., Demir A. The effect of tooth bleaching on the shear bond strength of orthodontic brackets using self-etching primer systems. — Eur J Dent. — 2013; 7 (1): 55—60. PMID: 23408777
  27. Vivek R., Soni R. Denture base materials: Some relevant properties and their determination. — International Journal of Dentistry and Oral Health. — 2015; 4. DOI: 10.16966/2378—7090.126
  28. Anthony D.H., Peyton F.A. Evaluating dimensional accuracy of denture bases with a modified comparator. — J Prosthet Dent. — 1959; 9: 683—92. DOI: 10.1016/0022—3913(59)90141—6
  29. Anthony D.H., Peyton F.A. Dimensional accuracy of various denture-base materials. — J Prosthet Dent. — 1962; 1: 67—81. DOI: 10.1016/0022—3913(62)90011—2
  30. Johnston E.P., Nicholls J.I., Smith D.E. Flexure fatigue of 10 commonly used denture base resins. — J Prosthet Dent. — 1981; 46 (5): 478—83. PMID: 6946217
  31. Hamedi-Rad F., Ghaffari T., Rezaii F., Ramazani A. Effect of nanosilver on thermal and mechanical properties of acrylic base complete dentures. — J Dent (Tehran). — 2014; 11 (5): 495—505. PMID: 25628675
  32. Vallittu P.K. A review of methods used to reinforce polymethyl methacrylate resin. — J Prosthodont. — 1995; 4 (3): 183—7. PMID: 8603209
  33. John J., Gangadhar S.A., Shah I. Flexural strength of heat-polymerized polymethyl methacrylate denture resin reinforced with glass, aramid, or nylon fibers. — J Prosthet Dent. — 2001; 86 (4): 424—7. PMID: 11677538
  34. Kanie T., Fujii K., Arikawa H., Inoue K. Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers. — Dent Mater. — 2000; 16 (2): 150—8. PMID: 11203537
  35. Marei M.K. Reinforcement of denture base resin with glass fillers. — J Prosthodont. — 1999; 8 (1): 18—26. PMID: 10356551
  36. Stipho H.D., Stipho A.S. Effectiveness and durability of repaired acrylic resin joints. — J Prosthet Dent. — 1987; 58 (2): 249—53. PMID: 3305890
  37. DeBoer J., Vermilyea S.G., Brady R.E. The effect of carbon fiber orientation on the fatigue resistance and bending properties of two denture resins. — J Prosthet Dent. — 1984; 51 (1): 119—21. PMID: 6583382
  38. Tanoue N., Nagano K., Matsumura H. Use of a light-polymerized composite removable partial denture base for a patient hypersensitive to poly (methyl methacrylate), polysulfone, and polycarbonate: a clinical report. — J Prosthet Dent. — 2005; 93 (1): 17—20. PMID: 15623992
  39. Ellakwa A.E., Morsy M.A., El-Sheikh A.M. Effect of aluminum oxide addition on the flexural strength and thermal diffusivity of heat-polymerized acrylic resin. — J Prosthodont. — 2008; 17 (6): 439—44. PMID: 18482365
  40. Mohamed S.H., Arifin A., Ishak Z.A.M., Nizam A., Samsudin A.R. Mechanical and thermal properties of hydroxyaptite filled poly (methyl methacrylate) heat processed denture base material. — Med J Malaysia. — 2004; 59 Suppl B: 25—6. PMID: 15468801
  41. Mohamed S.H., Arifin A., Ishak Z.A.M., Nizam A., Samsudin A.R. Effect of powder to liquid ratio on tensile strength and glass transition temperature of alumina filled poly methyl methacrylate (PMMA) denture base material. — Med J Malaysia. — 2004; 59 Suppl B: 147—8. PMID: 15468861
  42. Pesci-Bardon C., Fosse T., Serre D., Madinier I. In vitro antiseptic properties of an ammonium compound combined with denture base acrylic resin. — Gerodontology. — 2006; 23 (2): 111—6. PMID: 16677185
  43. Messersmith P.B., Obrez A., Lindberg S. New acrylic resin composite with improved thermal diffusivity. — J Prosthet Dent. — 1998; 79 (3): 278—84. PMID: 9553880
  44. Rawls H.R., Starr J., Kasten F.H., Murray M., Smid J., Cabasso I. Radiopaque acrylic resins containing miscible heavy-metal compounds. — Dent Mater. — 1990; 6 (4): 250—5. PMID: 2086302
  45. Rawls H.R., Marshall M.V., Cardenas H.L., Bhagat H.R., Cabasso I. Cytotoxicity evaluation of a new radiopaque resin additive — triphenyl bismuth. — Dent Mater. — 1992; 8 (1): 54—9. PMID: 1521685
  46. Pérez L.D.,Giraldo L.F., Brostow W., López B.L. Poly(methyl acrylate) plus mesoporous silica nanohybrids: Mechanical and thermophysical properties. — E-Polymers. — 2007; 29. DOI: 10.1515/epoly.2007.7.1.324
  47. Frangou M., Huggett R., Stafford G.D. Evaluation of the properties of a new pour denture base material utilizing a modified technique and initiator system. — J Oral Rehabil. — 1990; 17 (1): 67—77. PMID: 2405128
  48. AlKahtani R.N. The implications and applications of nanotechnology in dentistry: A review. — Saudi Dent J. — 2018; 30 (2): 107—16. PMID: 29628734
  49. Begum S.S., Ajay R., Devaki V., Divya K., Balu K., Kumar P.A. Impact strength and dimensional accuracy of the base resin for thermal curing reinforced with ZrO2 nanoparticles: An in vitro study. — Journal of Pharmacy and Bioallied Sciences. — 2019; 6: 365—70. DOI: 10.4103/jpbs.jpbs_36_19
  50. Sheejith M., Swapna C., Roshy G., Niveditha S.P. Evolution of denture base materials from past to new era. — Journal of Dental and Medical Sciences. — 2018; 11: 23—7.
  51. Vasilieva T.M., Hein A.M., Vargin A., Kudasova E., Kochurova E., Nekludova M. The effect of polymeric denture modified in low temperature glow discharge on human oral mucosa: Clinical case. — Clinical Plasma Medicine. — 2017; 9: 1—5. DOI: 10.1016/j.cpme.2017.10.002
  52. Nagrath M., Sikora A., Graca J., Chinnici J.L., Rahman S.U., Reddy S.G., Ponnusamy S., Maddi A., Arany P. Functionalized prosthetic interfaces using 3D printing: Generating infection-neutralizing prosthesis in dentistry. — Materials Today Communications. — 2018; 15: 114—9. DOI: 10.1016/j.mtcomm.2018.02.016
  53. Shinawi L.A. Effect of denture cleaning on abrasion resistance and surface topography of polymerized CAD CAM acrylic resin denture base. — Electron Physician. — 2017; 9 (5): 4281—8. PMID: 28713496
  54. Steinmassl P.-A., Wiedemair V., Huck C., Klaunzer F., Steinmassl O., Grunert I., Dumfahrt H. Do CAD/CAM dentures really release less monomer than conventional dentures? — Clin Oral Investig. — 2017; 21 (5): 1697—705. PMID: 27704295

Downloads

Received

December 24, 2020

Published on

March 1, 2021