DOI:

10.37988/1811-153X_2018_2_78

Effect of surface pretreatment of thermoplastic materials (PEEK and polyoxymethylene) on bonding to composite and acrylic materials

Downloads

Authors

  • I.R. Volchkova 1, assistant at the Prosthetic dentistry Department
  • A.V. Yumashev 1, PhD in Medical Sciences, professor of the Prosthodontics department
  • V.U. Doroshina 1, PhD in Medical Sciences, associate professor of the Therapeutic dentistry Department
  • A.S. Utyuzh 1, PhD in Medical Sciences, full professor of the Prosthodontics Department
  • D.A. Nikolenko 1, assistant at the Prosthetic dentistry Department
  • N.T. Shtanko 2, senior expert for science and education programs
  • 1 Sechenov University, 119435, Moscow, Russia
  • 2 “3M Russia” Ltd., 108811, Moscow, Russia

Abstract

The purpose of our study was to evaluate the adhesion of samples from various materials and the effect of surface pretreatment on the bonding of composite and acrylic with samples from Bio XS (Bredent, Germany), Dentokeep Peek (Nt-trading, Germany), Dental D (Quattro Ti, Italy). To study the adhesion of materials, we made 10 samples of the materials described above. After pretreatment of the surface, the columns of the Filtek Ultimate composite and acrylic 3.14 mm in diameter were sticked to the samples. The samples were placed in a Shear Bond Tester («Bisco»). Based on the results of our studies, the sandblasting method of preliminary surface treatment followed by the application of the primer Visiolink (Bredent, Germany) can be used for clinical application. The described method can not be recommended for veneering the frames of materials with acrylic resin with artificial teeth. In this case, it is necessary to use methods of mechanical retention.

Key words:

thermoplastic materials, shear bond strength, PEEK, polyoxymethylene, removable prostheses

For Citation

[1]
Volchkova I.R., Yumashev A.V., Doroshina V.U., Utyuzh A.S., Nikolenko D.A., Shtanko N.T. Effect of surface pretreatment of thermoplastic materials (PEEK and polyoxymethylene) on bonding to composite and acrylic materials. Clinical Dentistry (Russia).  2018; 2 (86): 78—80. DOI: 10.37988/1811-153X_2018_2_78

References

  1. Волчкова И.Р., Юмашев А.В., Утюж А.С., Дорошина В.Ю., Михайлова М.В. Применение полиэфирэфиркетона в съемном протезировании: анализ и сравнение с другими термопластическими материалами (обзор литературы). - Клиническая стоматология. - 2018; 1 (85): 68-71.
  2. Трегубов И.Д., Михайленко Л.B, Болдырева Р.И. и др. Применение термопластических материалов в стоматологии. Учебное пособие. - М.: МЗ РФ, 2007. - С. 30-41.
  3. Costa-Palau S., Torrents-Nicolas J., Brufau-de Barbera M., Cabratosa-Termes J. Use of polyetheretherketone in the fabrication of a maxillary obturator prosthesis: a clinical report. - J Prosthet Dent. - 2014; 112: 680-2.
  4. Feerick E.M., Kennedy J., Mullett H., FitzPatrick D., McGarry P. Investigation of metallic and carbon fibre PEEK fracture fixation devices for three-part proximal humeral fractures. - Med Eng Phys. - 2013; 35: 712-22.
  5. Fuhrmann G., Steiner M., Freitag-Wolf S., Kern M. Resin bonding to three types of polyaryletherketones (PAEKs)- durability and influence of surface conditioning. - Dent Mater. - 2014; 30: 357-63.
  6. Hallmann L., Mehl A., Sereno N., Hämmerle C.H.F. The improvement of adhesive properties of PEEK through different pre-treatments. - Appl Surf Sci. - 2012; 258: 7213-8.
  7. Kern M., Lehmann F. Influence of surface conditioning on bonding to polyetheretherketone (PEEK). - Dent Mater. - 2012; 28: 1280-3.
  8. Keul C., Liebermann A., Schmidlin P.R., Roos M., Sener B., Stawarczyk B. Influence of PEEK surface modification on surface properties and bond strength to veneering resin composites. - J Adhes Dent. - 2014; 16: 383-92.
  9. Koutouzis T., Richardson J., Lundgren T. Comparative soft and hard tissue responses to titanium and polymer healing abutments. - J Oral Implantol. - 2011; 37: 174-82.
  10. Kurtz S.M., Devine J.N. PEEK biomaterials in trauma, orthopedic, and spinal implants. - Biomaterials. - 2007; 28: 4845-69.
  11. Kurtz S.M. PEEK biomaterials handbook. - Waltham: William Andrew, 2012. - Pp. 1-7, 243-260.
  12. Schmidlin P.R., Stawarczyk B., Wieland M., Attin T., Hämmerle C.H.F., Fischer J. Effect of different surface pre-treatments and luting materials on shear bond strength to PEEK. - Dent Mater. - 2010; 26: 553-9.
  13. Silthampitag P., Chaijareenont P., Tattakorn K., Banjongprasert C., Takahashi H., Arksornnukit M. Effect of surface pretreatments on resin composite bonding to PEEK. - Dent Mater J. - 2016; 35 (4): 668-74.
  14. Sproesser O., Schmidlin P.R., Uhrenbacher J., Roos M., Gernet W., Stawarczyk B. Effect of sulfuric acid etching of polyetheretherketone on the shear bond strength to resin cements. - J Adhes Dent. - 2014; 16: 465-72.
  15. Stawarczyk B., Beuer F., Wimmer T., Jahn D., Sener B., Roos M., Schmidlin P.R. Polyetheretherketone-a suitable material for fixed dental prostheses? - J Biomed Mater Res B Appl Biomater. - 2013; 101: 1209-16.
  16. Stawarczyk B., Keul C., Beuer F., Roos M., Schmidlin P.R. Tensile bond strength of veneering resins to PEEK: impact of different adhesives. - Dent Mater. - 2013; 32: 441-8.
  17. Stawarczyk B., Jordan P., Schmidlin P.R., Roos M., Eichberger M., Gernet W., Keul C. PEEK surface treatment effects on tensile bond strength to veneering resins. - J Prosthet Dent. - 2014; 112: 1278-88.
  18. Tannous F., Steiner M., Shahin R., Kern M. Retentive forces and fatigue resistance of thermoplastic resin clasps. - Dent Mater. - 2012; 28: 273-8.
  19. Tetelman E.D., Babbush C.A. A new transitional abutment for immediate aesthetics and function. - Implant Dent. - 2008; 17: 51-8.
  20. Toth J.M., Wang M., Estes B.T., Scifert J.L., Seim H.B., Turner A.S. Polyetheretherketone as a biomaterial for spinal applications. - Biomaterials. - 2006; 27: 324-34.
  21. Utyuzh A.S., Yumashev A.V., Mikhailova M.V. Spectrographic analysis of titanium alloys in prosthetic dentistry. - Journal of Global Pharma Technology. - 2016; 12: 7-11.
  22. Yumashev A.V., Utyuzh A.S., Volchkova I.R., Mikhailova M.V., Kristal E.A. The influence of mesodiencephalic modulation on the course of postoperative period and osseointegration quality in case of intraosseus dental implantation. - Indian Journal of Science and Technology. - 2016; 42 (9): 104307.
  23. Zhou L., Qian Y., Zhu Y., Liu H., Gan K., Guo J. The effect of different surface treatments on the bond strength of PEEK composite materials. - Dent Mater. - 2014; 30: 209-15.

Downloads

Published on

June 1, 2018