DOI:

10.37988/1811-153X_2020_4_75

Innovative technologies for the manufacture of complete removable dentures

Authors

  • S.V. Apresyan 1, PhD in Medical sciences, professor of the Prosthetic dentistry Department
  • M.S. Terekhov 1, postgraduate at the Prosthodontics Department
  • A.G. Stepanov 1, PhD in Medical Sciences, associate professor
  • P.L. Kravets 2, dental technician, head of the dental laboratory
  • P.S. Uretskiy 1, postgraduate at the Prosthodontics Department
  • M.I. Voropaeva 1, PhD in Medical Sciences, associate professor of the Prosthodontics Department
  • J.A. Shirokova 1, PhD in Medical Sciences, associate professor of the Prosthodontics Department
  • 1 RUDN University, 117198, Moscow, Russia
  • 2 “Harmony without symmetry” Dental Prosthetics Lab, 125315, Moscow, Russia

Abstract

This article describes the modern method of manufacturing complete removable dentures. This method allows with digital technologies to obtain a monolithic prosthesis, which eliminates inaccuracies in the positioning of the teeth when placing the teeth in the base of the prosthesis, as well as for gluing the base of the prosthesis and teeth using acrylic plastic. A description is also made of the basic tools and materials required to work on this technique. Clinical case. The patient came to the clinic with dissatisfaction with the previously made complete removable dentures. This patient has good clinical conditions for the manufacture of new complete removable dentures, pronounced alveolar ridges in height. Working in the 3Shape program and using the “Kravets Verticulator”, complete removable dentures were manufactured that completely satisfy the patient and perform full aesthetic and functional rehabilitation of the patient. Conclusion. Thanks to the use of the “Kravets’s Verticulatorˮ, it is possible to obtain a monolithically connected complete removable denture, due to which the physico-mechanical dentures obtained using this technology are improved. In the future, extensive laboratory and clinical studies of prostheses obtained by this innovative method are planned.

Key words:

full removable denture, Kravets’s verticulator

For Citation

[1]
Apresyan S.V., Terekhov M.S., Stepanov A.G., Kravets P.L., Uretskiy P.S., Voropaeva M.I., Shirokova J.A. Innovative technologies for the manufacture of complete removable dentures. Clinical Dentistry (Russia).  2021; 4 (96): 75—79. DOI: 10.37988/1811-153X_2020_4_75

References

  1. Apresyan S.V. Digital planning of orthopedic dental treatment. — Rus Dent J. — 2019; 23 (3—4): 158—64.
  2. Steinmassl P.-A., Klaunzer F., Steinmassl O., Dumfahrt H., Grunert I. Evaluation of Currently Available CAD/CAM Denture Systems. — Int J Prosthodont. — 2017; 30 (2): 116—22. PMID: 28267817
  3. Srinivasan M., Cantin Y., Mehl A., Gjengedal H., Müller F., Schimmel M. CAD/CAM milled removable complete dentures: an in vitro evaluation of trueness. — Clin Oral Investig. — 2017; 21 (6): 2007—19. PMID: 27826696
  4. Radford D.R., Juszczyk A.S., Clark R.K.F. The bond between acrylic resin denture teeth and the denture base: recommendations for best practice. — Br Dent J. — 2014; 216 (4): 165—7. PMID: 24557385
  5. Clements J.L., Tantbirojn D., Versluis A., Cagna D.R. Do denture processing techniques affect the mechanical properties of denture teeth? — J Prosthet Dent. — 2018; 120 (2): 246—51. PMID: 29551379
  6. Goodacre B.J., Goodacre C.J., Baba N.Z., Kattadiyil M.T. Comparison of denture tooth movement between CAD-CAM and conventional fabrication techniques. — J Prosthet Dent. — 2018; 119 (1): 108—15. PMID: 28506652
  7. Meneghihi A., Mazzarella S., Di Franco A. Full upper and lower duplicate dentures using Vertysystem Furbo. — GAP Australasian-Dentist. — 2019; (3): 82—4.
  8. Apresyan S.V., Kravets P.L. Patent 2722458. Russian Federation, IPC A61C13/00. Device for making dentures: No.2020107773, app. 02/20/2020: publ. 06/01/2020 Bul. No16.
  9. Chintalacheruvu V.K., Balraj R.U., Putchala L.S., Pachalla S. Evaluation of Three Different Processing Techniques in the Fabrication of Complete Dentures. — J Int Soc Prev Community Dent. — 2017; 7 (Suppl. 1): S18—S23. PMID: 28713763
  10. Apresyan S.V., Kravets P.L., Stepanov A.G., Terekhov M.S. Patent 2721891. Russian Federation, IPC A61C9/00. Method for manufacturing removable dentures: No.2020107774, app. 02/20/2020: publ. 05/25/2020 Bul. No15.
  11. Bonnet G., Batisse C., Bessadet M., Nicolas E., Veyrune J.-L. A new digital denture procedure: a first practitioners appraisal. — BMC Oral Health. — 2017; 17 (1): 155. PMID: 29262801
  12. Han W., Li Y., Zhang Y., Lv Y., Zhang Y., Hu P., Liu H., Ma Z., Shen Y. Design and fabrication of complete dentures using CAD/CAM technology. — Medicine (Baltimore). — 2017; 96 (1): e5435. PMID: 28072686
  13. Lee S., Hong S.-J., Paek J., Pae A., Kwon K.-R., Noh K. Comparing accuracy of denture bases fabricated by injection molding, CAD/CAM milling, and rapid prototyping method. — J Adv Prosthodont. — 2019; 11 (1): 55—64. PMID: 30847050
  14. Apresyan S.V., Stepanov A.G., Antonik M.M., Degtyarev N.E., Kravets P.L., Likhnenko M.N., Malazonia T.T., Sarkisyan B.A. Comprehensive digital planning of dental treatment: a practical guide. — M.: Mozartica, 2020.

Published on

January 13, 2021